Now more and more people are starting to set up a home theater as a home entertainment space, but there are always many headaches in the home theater decoration design process. Wiring is one of the most important issues. How to standardize, simple and beautiful wiring is very skillful, Xiaobian takes everyone to see how to wire in the home theater decoration design.
First, how should the wiring be used when the ceiling space is insufficient?
1. Increase the bottom of the ceiling: Even if there is no space on the ceiling, the user can still hide the automatic projector and screen on the special ceiling. The ceiling is mainly used to support and hide large machines in the home theater system, and also adds some architecture to the room according to the needs of users.
2, installed on the wall: the screen and projector slowly descend from the ceiling to add a lot of color to the home theater, it is also feasible to install these devices on the wall. For example, a flat-panel TV is installed directly in front of the wall, covered with gauze curtains, and then a starter is placed next to the TV. The gauze curtain is opened or closed by the device, giving the audience a cinematic realism. On the other side of the room, mount the projector on the back wall or hide it in the coffee table.
3. The speaker is installed next to it: If there is not enough space on the ceiling, it is not possible to install a ceiling-mounted speaker. In this case, the user can select the wall-mounted speaker. If the user wants the speaker not to be too conspicuous, the entire wall can be covered with a sound structure panel to make the room look pretty. We can also use a simpler method to paint the speaker color to match the color of the wall.
Second, how to compensate for the wiring orientation when the sound quality is poor?
1. Changing the room space or rearranging the furniture position can greatly improve the overall sound experience of the room. For example, the user can install a virtual wall in front of or behind the room to change the depth of the room. If you need to adjust the side wall, you can add a sound panel and move a certain distance. At the same time, we can also make full use of other facilities in the room, such as bookshelves and other decorations.
2. Sometimes, many unobtrusive devices in the room have a great effect on the improvement of sound quality, such as the closet in the room, the beveled ceiling or the release wall. Therefore, when installing a home theater system, it is best to consult the installer for the best placement advice, try not to ignore some small details, often the impact of these small details on the sound quality is immeasurable.
Third, how should the wiring be properly routed through the floor?
1. If the user is willing to install the cable under the carpet and the floor, you can make a hole in the floor and implant the cable along the corresponding pipe to fully protect the cable.
2. In the home theater decoration design, holes are made on the cement floor. The cable is hidden according to the path. Although the cable layout is good, it will have a relatively large impact on the overall aesthetics of the room. The overall project is quite complicated. If the user feels that the project is too cumbersome, then you can choose a flat cable. The cable is very thin and the thickness is like paper. If it is installed between the floor and the floor, the thickness is basically negligible, and the user is not easy. It is noticed, but there is a drawback in wiring in this way, that is, the floor above the wiring cannot be placed too heavy furniture.
3, wiring on the floor is the most common way, through the wall wiring is also a good choice. Cables can be mounted behind equipment such as siding and seat.
If you encounter any problems during the process of setting up a home theater, please pay attention to our WeChat public number: cnhifi consultation, to answer your questions free of charge.
Sterilization Card Bags
Guangzhou Ehang Electronic Co., Ltd. , https://www.ehangmobile.com