Direct frequency modulation circuit of crystal oscillator

Crystal oscillator direct frequency modulation circuit?

Today, the electronic enthusiasts network together with everyone to study the direct frequency modulation circuit of the crystal oscillator:

The center frequency stability of the direct frequency modulation circuit of the varactor diode (to the LC oscillator) is poor. In order to obtain high-stability FM signals, frequency stabilization measures must be taken, such as adding automatic frequency trimming circuits or phase-locked loops (discussed in Chapter 8). Another simple method of frequency stabilization is to directly tune the frequency of the crystal oscillator.

(A) Actual circuit; (b) AC equivalent circuit

a) It is the direct frequency modulation circuit of the varactor diode to the crystal oscillator. Figure (b) is its AC equivalent circuit. It can be seen from the figure that this circuit is a parallel crystal Pierce circuit, and its stability is higher than the Miller circuit. Among them, the varactor diode is equivalent to the fine-tuning capacitor in the crystal oscillator, and its series equivalent capacitance with C1 and C2 is used as the load capacitance CL of the quartz resonator. The oscillation frequency of this circuit is:

Features: Quartz crystals work in the inductive area. The oscillation frequency is between the series oscillation frequency and the parallel oscillation frequency of the crystal. The relative frequency deviation is very narrow, only 10-3 ~ 10-4.
The method of expanding the frequency deviation: A. Parallel small inductance at both ends of the crystal, this method is simple and effective, but the expansion range is limited, and the center frequency stability will be reduced;
B. Impedance transformation using π-type network;
C. Add a method of multiple frequency multiplication and mixing at the output of the FM oscillator. This method not only meets the requirements of carrier frequency, but also increases the frequency deviation.

Wireless In Ear Earphone Tws Earbuds /Wireless Earbuds

Product Description

Features:   

1, True wireless stereo: realizes movement and wireless control and everyone can share music without wrie  

2, Comfortable and convenient: Earplug made of food-grade silica gel material in combinalion with the design to avoid falling off, which makes you comfortable and relieved,also the Earbuds can be Dual or Single use.

Specification
Bluetooth Version: Bluetooth 4.2+EDR
Voice prompt for calling number 
Voice prompt for power and or off
Supports :A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/DI1.3
Adopt the advanced CVC6.0 active noise-cancellation
Built-in superior HD microphone, provide clear and loud sound
Selectable colors: black,,blue and GreenTWS Earbuds


TWS Earbuds

Tws Earbuds,Fully Wireless Earbuds,Wireless In Ear Headphones ,Mini Wireless Earbuds

Shenzhen Greater Industry Co., Ltd. , https://www.szgreater.net

Posted on