Support for USB memory devices compliant with the SeeQVaultTM standard
This article refers to the address: http://
Toshiba today announced the launch of the bridge chip "TC358782XBG" that supports the next-generation security specification SeeQVaultTM. SeeQVaultTM supports the transfer of copy-protected HD content to portable storage devices. Samples will be available starting in April and volume production is scheduled to begin in August.
Protected HD content cannot be transferred to external storage; users need to play content on the device that recorded it or convert it to SD quality. SeeQVaultTM provides a solution for compatible devices and enables HD content to be played on multiple platforms. Each SeeQVaultTM compliant flash (eg SD memory card) will be assigned a security ID to perform the above functions.
The "TC358782XBG" brings the capabilities of SeeQVaultTM to portable storage devices such as USB HDDs. It supports secure transmission of HD content and allows users to play HD content on multiple devices that are compatible with the SeeQVaultTM standard.
Apply USB memory devices that conform to the SeeQVaultTM standard, such as mobile hard drives and SD card adapters.
Main specifications
| Product number | TC358782XBG |
|---|---|
| Input/output interface | SD host controller standard specification 3.00 USB 2.0 revision 2.0, SATA revision 2.6 |
| Source voltage | System: 1.1V I/O: 3/3V SD (UHS-I): 1.8/3.3V |
| Package | FBGA80 (7mm × 7mm, 0.65mm pitch) |
Note:
* SeeQVault is a trademark of NSM Initiatives LLC.
* ARM is a registered trademark of ARM Limited (or its subsidiaries) in the European Union and/or elsewhere.
* All other trademarks and trade names are the property of their respective owners.
Antenk manufactures a wide range of application specific board stacking connectors which were designed and built to specific customer requirements. Our experienced staff has developed custom products in a variety of contact styles, pitches and stacking heights. Our designs range from new concepts to duplicating existing market products identically or with improvements. Many desigsn are produced using automated manufacturing processes to increase reliability and provide significant cost savings
Board to Board Connector
Board-to-board (BTB) connectors as the name indicates is used for connecting circuits board together. This kind of connectors are suitable for stacking circuits boards one over another. Flat flexible cables can be avoided using these kinds of connectors; moreover it makes the entire unit more compact. The commonly used BTB connectors are SMT connectors and Berg Strip. We will discuss about them in detail in the following section.
SMT CONNECTOR
Surface Mount Technology (SMT) connector is a commonly found board-to-board connector in advanced circuit boards. As the name indicates this connector is available only in surface mount model. It is carefully mounted on to the solder pads on the surface of the PCB.
SMT connectors are ideal candidate for miniaturization due to their small area of occupancy and stacking height. They are suitable for double layered or multilayered PCBs. They are designed for high performance and reliability.
They commonly found in advanced circuit boards in networking equipment, telephones, mobile phones, computers and other consumer electronics.
Board-to-board (BTB) connectors are used to connect printed circuit boards (PCB), electronic components that contain a conductive pattern printed on the surface of the insulating base in an accurate and repeatable manner. Each terminal on a BTB connector is connected to a PCB. A BTB connector includes housing and a specific number of terminals. The terminal is made from a conductive material (mostly copper alloy), and plated to improve conductivity and antirust. Terminals transmit the current/signal between PCBs connected by BTB; the housing is made of insulating material (mostly plastic).
The basic types of Board to Board Connector
Broadly speaking, board to board connectors are manufactured in the following types:
Pin Header
Elevated Pin Header
Socket
Elevated Socket
Shrouded Header
Box Header
The way mount Board to Board Connectors on a PCB
board to board connectors are available in through hole (TH) and Surface Mount (SMT) variants.
Locating pegs (also referred to as locating posts, alignment pins or board locks) are used to assist alignment of connectors to the PCB. Locating pegs are particularly useful when using surface mount components.
board to board connectors are available in the following pitches: 04mm/0.5mm/0.8mm/1.0mm/1.27mm/2.54mm/3.96mm/4.0mm
For experienced hardware designers choosing board to board connectors is second nature, for the uninitiated it can be daunting. We offer design support and will help guide you through the options available. If you need help with your board to board connector design, contact antenk. Where required antenk also offer non standard pitches.
0.4mm Board To Board Connectors,0.5mm Female Board To Board Connector,0.8mm 1.0 mmPcb Board To Board Connector,Board To Board Terminal Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenk.com