Energy-saving lamp market need to be cautious when buying

“The new energy-saving lamp that I just bought was flashed off and the lights turned dark.” Ms. Li, who lives in downtown Laiyang, said helplessly. Laiyang City Bureau of Quality Supervision revealed that the market for energy-saving lamps is mixed, and many products have safety indicators, mandatory energy-saving indicators, and unqualified performance indicators. Recently, the quality supervision personnel of the Bureau conducted unannounced visits to major supermarkets and wholesale markets in the urban areas of the lamps and lanterns, and found that halogen powder lamps with low prices were used as energy-saving lamps for sale.

No goods are cheap

Into the lighting market in the wholesale market in Laiyang City, dazzling array of lamps and lanterns. In the striking positions of various lighting stores, most of them are equipped with energy-saving lamps of various specifications, such as tubular, spiral, and spherical, with power specifications ranging from 3 watts to 240 watts. Seeing that the quality supervision personnel were aimlessly searching, a store clerk took the initiative to say hello, stating that they had a complete range of lighting fixtures, reliable quality, and a price ranging from a hundred dollars to a few dollars. When it was learned that the quality supervisor only bought an ordinary energy-saving light bulb, the shopkeeper recommended to the quality supervisor a "Xiaobailong" brand 22-watt frequency conversion eye lamp, which was equivalent to an incandescent lamp of 95W, priced at 20 yuan. The quality supervisor said that he was too expensive. He immediately took out a "good time" brand white energy-saving lamp and sold only 5 yuan. The quality supervisor noticed that the exterior and base of the lamp were rough and the markings on the bulb were not clear. “Is it not so cheap and quality?” In the face of doubt, the clerk unpleasantly swept the quality supervision personnel. “A penny, a good product, high quality, high cost, and high price. Just recommended to you is the trichromatic phosphor. Energy-saving lamps. This kind of lamp is made of halogen powder, but it can also be used."

Industry sources said that halogen powder is used to make metal magnesium, disinfectants, fire extinguishing agents, frozen brine, and also used in ceramics, paper, textile and other industries, and the price of tricolor phosphors is about 20 times that of halogen powder, but three The basic color phosphor has better coloration than the halogen powder, less light decay, and higher light efficiency. National standards for energy-saving lamps stipulate that energy-saving lighting effects should be at least 36 lumens, and should generally be between 40 and 50 lumens. Currently, halogen powder lamps currently on the market are difficult to meet national standards. The quality supervisors visited several lighting shops and discovered that energy-saving lamps with a few yuan were found everywhere. A 40-watt "Philips" energy-saving lamp sold at a stall costs only 10 yuan, and can be purchased for 5.5 to 5 watts at 5 to 13 watts.

It's a good shopping mall

Immediately afterwards, quality supervision personnel came to several large supermarkets in the urban area. In the lighting area, various brands of energy-saving light bulbs are classified as emissions, and various models are available. The quality supervisor readily picks up an energy-saving light bulb and looks at the bulb's packaging, clearly marked with "trichromatic fluorescent tubes." At the same time, the factory name, site, contact telephone number, voltage, frequency, power, trademark and current, product implementation standards, and energy efficiency grades are all available, and the price is generally between 20-40 yuan. The combination of the lamp holder and the plastic parts of the energy-saving lamp is tight, and the lamp tube and the plastic parts of the lower shell are firmly combined, and the upper shell plastic part and the lower shell plastic part are fastened in place. "This is a three-color energy-saving lamp, high luminous efficiency, good color, long life, you can rest assured that use." When asked about the quality, the salesman said that there are hundreds of energy-saving lamps in the general market, many are Miscellaneous brands, the price is very low, a few dollars can buy one, but the average consumer is difficult to distinguish the quality of the merits.

How to buy

Laiyang City Bureau of Quality Supervision Inspection Brigade staff said that energy-saving lamps require a relatively high production process, the cost is relatively high, the cost should be more than ten dollars, the sales price should also be more than ten dollars, the import is even higher . Therefore, energy-saving lamps whose price is only a few yuan are mostly inferior products, and consumers should be cautious in choosing.

The first step in purchasing an energy-saving lamp is to look at the brand and the logo. A good energy-saving lamp usually has clear, legible and legible information. If you do not worry, consumers can also observe the lamp light at the moment of power. Three primary color energy-saving lamps light up for a few minutes before they reach normal brightness, which is both bright and soft; and once the power of the halogen powder lamp is turned on, the brightness basically reaches the peak value, and the brightness is low and the light color is blue, which looks pale and weak. In addition, consumers can experience hands-on experience to check the quality of energy-saving lamps. For example, rotate the lamp head clockwise or counterclockwise to observe if the lamp head and the lamp body are loose and shake the energy-saving lamp by hand. If the lamp tube and the plastic parts are firmly connected, there will be no ringing.

Flexible PCB

Flexible Printed Circuit boards derive their name for their ability to enable the circuitry to be designed to fit the electronic device or product, as opposed to building the device to conform with the Circuit Board . Flex boards are characterized by a distinctly patterned printed circuitry and component arrangement highlighted by a malleable base material. 

Exploring the Many Advantages of Flex Circuit Boards  

Flexible Printed Circuit Boards offer a number of potential benefits including:

• Saving Space: Flex PCB design requires only about 10 percent of the space and weight of a wired circuit board assembly, offering greater installation and packaging freedom. The inherent flexibility also permits tighter bend capabilities.

• Maximum Reliability: A flexible Printed Circuit Board requires fewer interconnects, which in turn require fewer contact crimps, connectors and solder joints. Simply put, a Flexible PCB Board does not contain as many potential sources for failure, which enhances their reliability.

• Enhanced Capabilities: The flexible PCB is compatible with virtually any type of connector or component and works well with options such as ZIP connectors. They also perform extremely well in extreme temperatures and offer superior resistance to radiation and chemicals.

• Cost Savings: Cost-saving advantages of flexible printed circuits include reduced material and packaging requirements, lower parts replacement costs and a reduction in assembly errors that could otherwise result in the need for repairs.

All of these benefits make flex circuit boards ideally suited for a wide range of applications in industries such as Military, Transportation, Medical, Consumer Electronics, Automotive, Aerospace, Communications and Industrial.

BentePCB: A Leading Flex PCB Manufacturer for More Than a Decade

At BentePCB, we specialize in the fabrication and assembly of flexible printed circuit products for use in the manufacturing of medical devices and various types of telecommunication and industrial equipment. Our Custom PCB manufacturing capabilities allow us to develop and produce a top-performing flex PCB that meets your unique requirements. We can also work with you to produce a custom flex PCB Prototype that will significantly improve your prospects of a successful project outcome. Detailed capabilities please refer to the following form.

Item

Capability

Quality Grade

Standard IPC 2

Number of Layers

1 - 8layers

Build Time

2days - 30days

Material

DuPont PI, Domestic Shengyi PI

Board Size

Min 6*6mm, Max 406*610mm

Board Thickness

0.08mm - 0.6mm

Finished board thickness  tolerance

0.085mm≦board thickness<0.4mm

±2mil(±0.04m)

Outer Layer Base Copper Thickness

0.3oz - 1.0oz

Min Tracing/Spacing

2.5mil/2.5mil

Min. Annular Ring

4mil

Min. Drilling Hole Diameter

8mil(0.2mm)

Min. hole size---Drilling

8mil(0.2mm)

Min. finished via diameter

6mil(0.15mm)

Tolerance of dimension

3mil(0.076 mm)

Solder Mask Sides

As per the file

Solder Mask Color

Green, White, Blue, Black, Red, Yellow

Solder-stop coating---Soldermask oil

Green, White, Blue, Black, Red, Yellow

Solder-stop coating---Coverlay

PI and PET film

Silkscreen Sides

As per the file

Silkscreen Color

White, Black, Yellow

Surface Finish

OSP

HASL - Hot Air Solder Leveling
Lead Free HASL
ENIG - Electroless Nickle/Immersion Gold

Flash Gold (Soft Gold)

Gold Plated

Immersion Silver

Immersion Tin

Other Techniques

Peelable solder mask 
Gold fingers 
Stiffener (only for PI/FR4 substrate)

 

About Us:

BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and flexible PCB mass production. The company was established on 2011.
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.

Why Us?

UL (E492586), ISO9001,  ISO14001, TS16949, RoHS certified.
Turnover USD 
10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 
16 layers.
Special Material:
ROGERS, Arlon, Taconic.etc.
Client:
Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.


Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):

ISO9001,ISO14001UL:E492586

Factory Tour:

PCB Manufacturer

PCB Factory

PCB Manufacturing

Exhibition:

We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.

Exhibition

Delivery:

BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
Delivery

FAQ:

Q1: What does BentePCB need for a customized PCB order?
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.

PCB China

We don`t just sell PCBs .We sell sleep.

Contact Us

Flexible PCB

Flexible PCB, Flexible PCB Prototype, Flexible Circuit Board, Flexible Printed Circuit

Shenzhen Bente Circuit Limited , http://www.bentegroup.com

Posted on