LED power supply is also an accessory product. The quality of the power supply on the market is uneven. The following is the knowledge of some LED Driver power supplies for the first time.
1. What is the Led Driver power supply?
The LED drive power source converts the power supply into a specific voltage and current to drive the LED light-emitting voltage converter. Usually, the input of the LED drive power source includes high-voltage power frequency AC (ie, mains), low-voltage DC, high-voltage DC, low-voltage high-frequency. AC (such as the output of an electronic transformer). The output of the LED driver is mostly a constant current source that changes the voltage as the LED's forward voltage drop changes. The core components of the LED power supply include a switch controller, an inductor, a switching component (MOSfet), a feedback resistor, an input filter component, an output filter component, and the like. According to the requirements of different occasions, there are also input overvoltage protection circuit, input undervoltage protection circuit, LED open circuit protection, overcurrent protection and other circuits.
2, LED drive power features
(1) High reliability
Especially like the driving power supply of LED street lamps, it is installed at high altitude, the maintenance is inconvenient, and the maintenance cost is also large.
(2) High efficiency
LEDs are energy-saving products, and the efficiency of driving power supplies is high. It is very important to dissipate heat from the power supply installed in the fixture. The power supply has high efficiency, its power consumption is small, and the heat generated in the lamp is small, which reduces the temperature rise of the lamp. It is beneficial to delay the light decay of LEDs.
(3) High power factor
The power factor is the grid's load requirements. Generally, there are no mandatory indicators for electrical appliances below 70 watts. Although the power factor of a single power consumer with low power has little effect on the power grid, the amount of lighting used at night is large, and the similar load is too concentrated, which will cause serious pollution to the power grid. For 30 watts to 40 watts of LED driver power, it is said that in the near future, there may be certain indicators for power factors.
Led Controller is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, Flexible Strip light, wall washer lamp, glass curtain wall light and so on;It has power-fail memory, synchronized indicator light show and other functions.when you use the controller, connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power;
How to connect leds with controller?
LED Controller
Led Controller,Led Strip Controller,Led Light Controller,Programmable Led Controller
SHENZHEN LINGBENYANG IND. CO., LTD. ,