Die-Casting Aluminum UFO LED High Bay Light Fixtures

100W UFO LED High Bay Light
Industrial UFO Highbay Lighting Lamp IP65 Waterproof 100lm/W  
 
Product Description
 






1. With Original 3030 LED
2.  Meanwell driver, 5 years warranty
3. Power: 100w/150w/200w/
4. Equiv. to: 250W/250W-400W/400W-500W/600W/700W/1000W
5. Various beam angles optional: 60°/90°/120°/150°
6. Function: Zigbee dimmable, DALI dimmable, motion sensor, daylight sensor optional
7. Materials: Die cast Aluminum  / Tempered glass (PC lens optional)
8. Installation method: Loop & Hook hanging / Wall mount / Surface mount / Rack mount
9. Angle for flexible bracket : 30°, 60°, 90°, 120°, 150°, 180°
10. Ideal mounting height: 8-15 m
11. Certification: SAA ,C-Tick,CE, Rohs ,TUV
Specifications:   

Features
1. Meanwell driver + Nichia chips + Unique design / Private tooling heat sink
2. Unique design UFO shape, lighter and smaller, no reflector, saving much freight cost
3. Compact Design, no assembly, easy installation, saving local labour cost
4. Modular design, easily replace the driver
5. Wide aluminum plate design, heat dissipation fast and evenly
6. SMD LEDs are on Large diameter PCB, so the heating from each SMD can be conducted soon and fully,
which guaranteed a low lumen decay and long life
7. All stainless screws prevent bad situation 

Dimension








Installation of  Nichia LED High Bay Light
Hook installation steps: 
1. Cut off power before operation.
2. Knowing the inside diameter of the luminaires then Choose suitable hook for the luminaires.
3. Fix the hook before installation and make the it can bear over 3 times weight of the lamp
4. Connect the lamp with hook and make it is safe.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND 
6. Light up the luminaires!
Bracket installation steps: 
1. Cut off power before installation.
2. Measure the hole size on the holder,choose suitable screw.
3. Fix the screw at the place where luminaires will be installed and it should can bear over 3 times the weight of the luminaires
4. Screw up the screws at both sides of holder, then connect the hold hole with screws, tighten it up.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND   
6. Light up the luminaires !  
Attention
Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp.  
Application
1. factories, industrial production workshop, warehouse;
2. gym, stadiums, golf courses,
3. commercial establishments, overpasses, outdoor advertising board, landmarks;
4. stage, yard, garden, lawn, park, plaza;
5. supermarket, shopping mall, exhibition hall;
6. ships, airports, subways, gas station, the train station, highway toll station, dock 
7. factory, office, meeting room, conference hall, storeroom, etc. 
Packaging & Shipping
Packaging: carton for strong protection
Shipping   : 3-5 for samples, 5-15 for all items, DHL UPS EMS others are available.
 
 

100W UFO LED High Bay Light
Industrial UFO Highbay Lighting Lamp IP65 Waterproof 100lm/W  
 
Product Description
 






1. With Original 3030 LED
2.  Meanwell driver, 5 years warranty
3. Power: 100w/150w/200w/
4. Equiv. to: 250W/250W-400W/400W-500W/600W/700W/1000W
5. Various beam angles optional: 60°/90°/120°/150°
6. Function: Zigbee dimmable, DALI dimmable, motion sensor, daylight sensor optional
7. Materials: Die cast Aluminum  / Tempered glass (PC lens optional)
8. Installation method: Loop & Hook hanging / Wall mount / Surface mount / Rack mount
9. Angle for flexible bracket : 30°, 60°, 90°, 120°, 150°, 180°
10. Ideal mounting height: 8-15 m
11. Certification: SAA ,C-Tick,CE, Rohs ,TUV
Specifications:   

Features
1. Meanwell driver + Nichia chips + Unique design / Private tooling heat sink
2. Unique design UFO shape, lighter and smaller, no reflector, saving much freight cost
3. Compact Design, no assembly, easy installation, saving local labour cost
4. Modular design, easily replace the driver
5. Wide aluminum plate design, heat dissipation fast and evenly
6. SMD LEDs are on Large diameter PCB, so the heating from each SMD can be conducted soon and fully,
which guaranteed a low lumen decay and long life
7. All stainless screws prevent bad situation 

Dimension








Installation of  Nichia LED High Bay Light
Hook installation steps: 
1. Cut off power before operation.
2. Knowing the inside diameter of the luminaires then Choose suitable hook for the luminaires.
3. Fix the hook before installation and make the it can bear over 3 times weight of the lamp
4. Connect the lamp with hook and make it is safe.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND 
6. Light up the luminaires!
Bracket installation steps: 
1. Cut off power before installation.
2. Measure the hole size on the holder,choose suitable screw.
3. Fix the screw at the place where luminaires will be installed and it should can bear over 3 times the weight of the luminaires
4. Screw up the screws at both sides of holder, then connect the hold hole with screws, tighten it up.
5. Connect the power wire:Brown,"L",connect to LIVE; Blue, "N",connect to NEUTRAL; Lime-green,connect to EARTH/GROUND   
6. Light up the luminaires !  
Attention
Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of the lamp.  
Application
1. factories, industrial production workshop, warehouse;
2. gym, stadiums, golf courses,
3. commercial establishments, overpasses, outdoor advertising board, landmarks;
4. stage, yard, garden, lawn, park, plaza;
5. supermarket, shopping mall, exhibition hall;
6. ships, airports, subways, gas station, the train station, highway toll station, dock 
7. factory, office, meeting room, conference hall, storeroom, etc. 
Packaging & Shipping
Packaging: carton for strong protection
Shipping   : 3-5 for samples, 5-15 for all items, DHL UPS EMS others are available.
 
 

Advant Master is a widely installed and actively supported ABB DCS. It is used by many customers that plan to stay on the platform for several years to come. A majority of customers have enhanced user experience by adding the System 800xA HMI to their Advant systems controllers and I/Os.

Released in 1992, Advant Master DCS was the result of the development of a common hardware and software platform for evolving the ABB Master and Taylor MOD 300 systems.
Advant Master DCS introduced two high capacity controllers, AC450 and AC410, and the S100 rack mounted I/O featuring an improved redundancy scheme, along with a state of the art operator interface, based on UNIX workstations. In 1996 the S800 remote I/O was launched, providing modular flexibility with redundant communication and a 1ms time stamp. 

The predecessor to Advant Master DCS, ABB Master, was introduced in 1984 based on MasterPiece 200 controllers with the rack mounted S100 I/O along with the MasterView 800 operator interface with high end Tesselator Display system, further adding remote S400 I/O in 1988. Remote EX S800 I/O and Profibus DP support for connection to third party sub systems was released in the late 1990s.

ABB Roborts: industrial robot spare parts DSQC series, Bailey INFI 90 and so on.

ABB Robots

Abb Robots,Abb Welding Robot ,Automatic Abb Robot,Industrial Abb Robot

Xiamen The Anaswers Trade Co,.LTD , http://www.answersplc.com